Contact formHTEP Series Jaw Crusher is mainly used for medium and fine crushing of raw materials such as coal, coal gangue, coke, limestone, pyrite, phosphate ore, etc. The crushing method is flexural extrusion, and the lump size of the material to be crushed should be 10-60 mm smaller than the feed port size of the selected model. For specific dimensions, please refer to the technical parameters.
The compressive strength of the material to be crushed should not exceed 1500 kg/cm³. If there are special requirements for the crushed material, please place an order in advance. This machine features a reasonable design, simple structure, easy maintenance, and user-friendly operation. It is widely used in metallurgy, mining, laboratory testing, coal, coking, and other industries.
Jaw Crusher Working Principle and Structural Features:
The crusher mainly consists of the frame, eccentric shaft, fixed jaw, movable jaw, adjustment device, transmission device, and power unit. The frame comes in two structural forms: one is integrally cast,and the other is welded from high-quality steel.
The eccentric shaft is made of high-quality carbon steel, with bearings installed at both ends and fastened to the frame. The movable jaw and the frame are fixed with a pair of ZGmm13 cast tooth plates. When the motor drives the belt pulley and the eccentric shaft to move the jaw plate back and forth, the tooth plates crush the material to achieve the purpose of crushing.
The adjustment device is mainly used to adjust the size of the discharge port. The toggle plate system not only adjusts the gap but also acts as a safety device. When overfeeding occurs or metal objects are encountered, it breaks first to protect other components from damage.
Jaw Crusher Technical Parameters:
| Model Item | HTEP-1 | HTEP-2 |
| Feed Opening Size (mm) | 125X150 | 100X60 |
| Maximum Feed Size (mm) | 100 | 60 |
| Discharge Size (mm) | 3-10 adjustable | |
| Power (kw) | 3 | 1.5 |
| Power Supply | AC380±10% 50Hz | |
| Machine Weight (kg) | 380 | 100 |
