Contact formThe kinematic viscosity tester is applicable to standards such as “GB265-88 Test Method for Kinematic Viscosity of Petroleum Products” and ASTM D445. It adopts a precision digital temperature controller to control temperature, with digital temperature display, high temperature control accuracy, digital stopwatch timing, and uniform temperature in the constant temperature bath. It can hold four viscometers for experiments at the same time and can also be used as a high-viscosity constant temperature water bath for other experiments.
Professional Features of Kinematic Viscosity Tester:
1.A precision digital temperature controller is used to control the temperature inside the bathtub, with a high-brightness digital stopwatch for timing, which is accurate and easy to use.
2.10-liter constant temperature bathtub with an outer layer of plexiglass insulation cover, ensuring uniform temperature distribution in the bath and good temperature control effect.
3.Components such as the heater are made of stainless steel, which is corrosion-resistant and durable. It is equipped with a ring-shaped fluorescent lamp for easy observation.
4.Four viscometer mounting holes allow parallel testing of more than two oil samples at the same time.
5.The capillary meter card adopts a three-point vertical type, which is flexible and convenient to operate, and the clamping is reliable.
Technical parameters：
| Execution standard | GB265, ASTM D445, IP71, etc. |
| capillary viscometer | Conforms to SH/T0173-92 “Technical Specifications for Glass Capillary Viscometers”Conforms to JJG155 “Verification Regulation of Working Capillary Viscometers” |
| Display mode | Precision Digital Temperature ControllerHigh-brightness Digital Stopwatch Timer |
| Temperature control range | Room temperature to 100℃ can be set arbitrarily |
| Determination range | Range of kinematic viscosity measurement: 0.5～20000mm²/sRange of dynamic viscosity measurement: 0.3～40000mPa·s |
| Temperature control accuracy | ±0.1℃ |
| Timing accuracy | ±0.1S |
| Timing range | 0.1 seconds – 999.9 seconds |
| Constant temperature bathtub | 250×250mm double layer |
| temperature measuring element | Imported precision platinum resistor |
| stirring speed | 1520 revolutions per minute |
| Maximum power | 1800W |
| Number of samples loaded | 4 |
| Usage environment | Ambient temperature 15–35℃ Ambient humidity less than 85% |
| Power supply requirements | AC220V±10% 50Hz |
| Maximum size | 300*290*530(length * width * height) |
| Weight | 110Kg |
